Sain Store Inc
. Preis vom 23.04.2014 09:44
Den Artikel SainSmart CNC TB6560 4 Achsen 3.5A Schrittmotor Steuerung, 4 Axis 3.5A Stepper Motor von gibt es ab 54,99 EUR im Shop amazon.

On board current switching - Power output can be set according to specific user requirement .
Relay spindle interface - Outputs Max. 36V 7.5A for spindle motors or coolant pump (only one device can be powered by this output!)
4 channel inputs interface- Can be used for XYZ limit and emergency stop .
Bipolar constant current chopper drive with non-resonant region .
Full closed-type optical isolation to protect the user's computer and equipment
Four control inputs (divided into pairs of knives) - Allows setting of limit and emergency stop.
Universal architecture - Supports most parallel software MACH3, KCAM4, EMC2 etc.

Electrical properties (ambient temperature Tj = 25 ℃ pm):
Input Power: 12-36V DC
Stepper motor drive current: 1.5A - 3A/phase
Drive type: *******-pole constant flow PWM actuation output
Compatible Stepper motors: 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
Dimensions: 18 * 12 * 4 cm (L*W*H)
Please Note
Please connect the power supply to the power switch of DC 12-36 V

Voltage Selection:
> 12-16V DC power supply for Nema 17 stepper motors
> 16-24V DC power supply for Nema 23 stepper motors
> 24-36V DC power supply for Nema 34 stepper motors
The power output of 12V shall be applied to the radiator fan of 12V
Driver output compatible with 2 or 4 phase, 4,6 or 8 lead stepper motors, 3A max.
Suitable for unipolar or bipolar stepper motors.
Voltage regulated spindle speed controlled by parallel interface as function of supply voltage.

100% Brand New
1 x 4 Axis TB6560 Stepper Motor Driver
1 x DB25 parallel cable
5 x Wire connectors
1 x CD software (English Manual & Mach 3)